tubeless

Discuss all things 1970 & later Airheads right here.
User avatar
twist
Posts: 249
Joined: Sun Jan 16, 2011 9:09 pm

Re: tubeless

Post by twist »

nice! I like the idea of using the engine for compressor. Good to know about the stems, I could barely find the straight ones, (maybe because I live in SF). :roll:
I'm off to do the tire thing and install my new, (to me), wheels. This will be fun!
Jean
Posts: 1100
Joined: Wed Aug 18, 2010 7:43 am

Re: tubeless

Post by Jean »

Engineair compressor...just be sure your engine runs OK on only one cyl. and remember to protect your electronic ignition if that's how you make a spark.
As in: Practice using it in your driveway. NOT on the roadside!!
Clemson, SC
R100s, R75/5
User avatar
twist
Posts: 249
Joined: Sun Jan 16, 2011 9:09 pm

Re: tubeless

Post by twist »

Jean wrote:Engineair compressor...just be sure your engine runs OK on only one cyl. and remember to protect your electronic ignition if that's how you make a spark.
As in: Practice using it in your driveway. NOT on the roadside!!
now, why didn't I think of that? :)
Major Softie
Posts: 8900
Joined: Tue Aug 03, 2010 1:46 pm

Re: tubeless

Post by Major Softie »

vanzen@rockerboxer.com wrote: I always carried an "engineair power pump" with my tire-plug kit.
I've got one of those too, but it's not so practical with my newer fuel injected bikes. :roll:
Last edited by Major Softie on Thu Sep 01, 2011 8:57 pm, edited 1 time in total.
MS - out
User avatar
twist
Posts: 249
Joined: Sun Jan 16, 2011 9:09 pm

Re: tubeless

Post by twist »

I have the new wheels installed with my new tires. Installed new front disc and brakes at the same time. I took my time and enjoyed the process, everything went swell. Now to break in a new rotor and breaks with new tires. Working on the bikes is part of the experience for me. The two go hand in hand for me and I feel satisfaction with the upgrade/retrofit.
User avatar
vanzen
Posts: 1438
Joined: Mon Aug 09, 2010 2:29 pm
Location: Hidin' in the Hills

Re: tubeless

Post by vanzen »

Major Softie wrote:
I've got one of those too, but it's not so practical with my newer fuel injected bikes.
Jeopardy time: Why were mini compressors invented ?
Image
User avatar
vanzen
Posts: 1438
Joined: Mon Aug 09, 2010 2:29 pm
Location: Hidin' in the Hills

Re: tubeless

Post by vanzen »

Jean wrote:Engineair compressor...just be sure your engine runs OK on only one cyl.
An airhead will run down the road on one cylinder,
provided no broken bits are in there to confound the revolution ...
Jean wrote:and remember to protect your electronic ignition if that's how you make a spark.
Simply lay the connected plug on a cylinder and you're good to go.
Image
Major Softie
Posts: 8900
Joined: Tue Aug 03, 2010 1:46 pm

Re: tubeless

Post by Major Softie »

vanzen@rockerboxer.com wrote:
Jean wrote:Engineair compressor...just be sure your engine runs OK on only one cyl.
An airhead will run down the road on one cylinder,
provided no broken bits are in there to confound the revolution ...
I think his real point was that your engine be in proper tune so that it will idle on one cylinder.
MS - out
Sunbeem
Posts: 1032
Joined: Tue Aug 03, 2010 4:42 am
Location: Bentham Lancaster England.

Re: tubeless

Post by Sunbeem »

A very instructive thread, with a happy ending -- thanks Twist.
Nice to know your potential runner is now a potential non-runner.

Sunbeem.
One day more -- one day less.
ME 109
Posts: 7307
Joined: Tue Aug 03, 2010 3:00 am
Location: Albury, Australia

Re: tubeless

Post by ME 109 »

vanzen@rockerboxer.com wrote:
Jeopardy time: Why were mini compressors invented ?
Fish tanks and trials bikes?
Lord of the Bings
Post Reply