Gidday Fellas,
Sibbo: Yes, have watched that many times, slightly jealous of his work... Amazing!
Dougie: Paint is "Viponds Paint" from Melbourne a little family business, covers well but a good "rich strong" looking gold colour seems to be getting harder to find nowdays, and it is an enamel and rather slow drying to btw.
Pinstriped A Tank
Re: Pinstriped A Tank
Cheers, Grant
Gippsland - Australia
1978 R100RS
1981 R100RS
1994 K1100RS
2005 R1150gsa
Gippsland - Australia
1978 R100RS
1981 R100RS
1994 K1100RS
2005 R1150gsa
Re: Pinstriped A Tank
Gday Grant,
Bewdifull. You will have to post a vid of your technique and then you will get a truck load of tanks and just have to sit there all day every day listening to the radio and sniffing fumes and meditating your way to enlightenment.
You can book my tank in but go easy on the gold eh.
Cheers Mal
Bewdifull. You will have to post a vid of your technique and then you will get a truck load of tanks and just have to sit there all day every day listening to the radio and sniffing fumes and meditating your way to enlightenment.
You can book my tank in but go easy on the gold eh.
Cheers Mal
- Airbear
- Posts: 2887
- Joined: Tue Aug 03, 2010 10:02 am
- Location: Oz, lower right hand side, in a bit, just over the lumpy part.
Re: Pinstriped A Tank
Very nice work, Grant. But I'll bet I could make that 'ole faithful and never shaking dagger liner brush' shake like a mo'fo. What's yer secret?grant81rs wrote:Gday fellas,
No not a beemer but I laid down using my ole faithful and never shaking dagger liner brush some hand painted gold metallic pinstriping today for this lovely restored triumph.
It's nice to know that the old skills are still being utilised in an era when sign-writing is largely computer aided. I hope you get the chance to pass on your skills.
Charlie
and Brunhilde - 1974 R90/6
Graduate, Wallace and Gromit School of Engineering and Design (Pending)
and Brunhilde - 1974 R90/6
Graduate, Wallace and Gromit School of Engineering and Design (Pending)
Re: Pinstriped A Tank
Grant, what a fine looking job that is! I have striped my hacksaw and ball peen hammer and the handle to my floor jack. Reason for mentioning that is it makes me appreciate the practiced technique it takes to do that kind of job.
I'm much more attracted to that kind of striping, which I've heard called "coach lining" as opposed to the type where the stripes form complex patterns, etc.
As the kids say: Respect.
Chuey
I'm much more attracted to that kind of striping, which I've heard called "coach lining" as opposed to the type where the stripes form complex patterns, etc.
As the kids say: Respect.
Chuey