R90S final drive re-seal needed
R90S final drive re-seal needed
Please recommend a good BMW mechanic for me. My 1975 R90S final drive needs a re-seal job; a chore I do not want to do. THANK YOU!
Ray
-
Zombie Master
- Posts: 8821
- Joined: Sun Aug 22, 2010 12:21 am
- Location: Vancouver Island BC Canada
Re: R90S final drive re-seal needed
[attachment=0]c8c169be-e941-4703-bdc0-50d4ad7e8f5c_0 copy 5.png
- Attachments
-
- c8c169be-e941-4703-bdc0-50d4ad7e8f5c_0 copy 5.png (34.27 KiB) Viewed 2428 times
Any and all disclaimers may apply
Re: R90S final drive re-seal needed
What part of the world are you in?
Cheers, Steve
Victoria, S.E.Oz.
1982 R100RSR100RS supergallery. https://boxerboy81.smugmug.com/R100RS
2006 K1200R.
1994 R1100GS.
Victoria, S.E.Oz.
1982 R100RSR100RS supergallery. https://boxerboy81.smugmug.com/R100RS
2006 K1200R.
1994 R1100GS.
-
Zombie Master
- Posts: 8821
- Joined: Sun Aug 22, 2010 12:21 am
- Location: Vancouver Island BC Canada
Re: R90S final drive re-seal needed
You're such a stickler Steve, he's obviously FROM THE STATES!
Any and all disclaimers may apply
Re: R90S final drive re-seal needed
Zombie Master wrote: ↑Mon Jul 26, 2021 9:42 pmYou're such a stickler Steve, he's obviously FROM THE STATES!
Left, middle, right?
Cheers, Steve
Victoria, S.E.Oz.
1982 R100RSR100RS supergallery. https://boxerboy81.smugmug.com/R100RS
2006 K1200R.
1994 R1100GS.
Victoria, S.E.Oz.
1982 R100RSR100RS supergallery. https://boxerboy81.smugmug.com/R100RS
2006 K1200R.
1994 R1100GS.
-
Zombie Master
- Posts: 8821
- Joined: Sun Aug 22, 2010 12:21 am
- Location: Vancouver Island BC Canada
Re: R90S final drive re-seal needed
I'm thinking right. Maybe Cray will tell us. 
Any and all disclaimers may apply
Re: R90S final drive re-seal needed
What part of the world are you in?
[/quote]
I am in Las Cruces, New Mexico, USA. Near El Paso, Texas.
[/quote]
I am in Las Cruces, New Mexico, USA. Near El Paso, Texas.
Ray
Re: R90S final drive re-seal needed
Hmmmm. I would have recommended Hansen's BMW, the dealer local to me in Southern Oregon. Very Airhead friendly and knowledgeable and I'm about to engage them to do the same thing. They also do spline repairs if you need that.
They do work by mail if that's fine for you.
They do work by mail if that's fine for you.
Call me Mel. Some years ago- never mind how long precisely- having little or no money in my purse, and nothing particular to interest me at home, I thought I would ride about a little and see the other parts of the world.
Re: R90S final drive re-seal needed
THANK YOU!melville wrote: ↑Tue Jul 27, 2021 10:15 am Hmmmm. I would have recommended Hansen's BMW, the dealer local to me in Southern Oregon. Very Airhead friendly and knowledgeable and I'm about to engage them to do the same thing. They also do spline repairs if you need that.
They do work by mail if that's fine for you.
Ray
Re: R90S final drive re-seal needed
Cray:
I'm in the midst of that very job. The reason I'm tackling it is that none of the dealers or shops around here (Southern CO) want to do it. If all you need to do is replace the seal on both sides of the axle the there is an excellent video on Boxer two valve. You just need a heat gun and some bearing drivers and a rubber! (not steel) mallet. Oh and a couple of 5mm x 15mm long cap screws to push the drive apart once you have it out.
If you need to replace the seal between the rear drive and the swing arm, then special tools are needed.
This video is for 85 and later but it is really helpful. William's enthusiasm is infectious.
https://www.boxer2valve.com/1981-on-mec ... drive.html
There may be a video for the earlier models. I could not find it though.
Good luck!
I'm in the midst of that very job. The reason I'm tackling it is that none of the dealers or shops around here (Southern CO) want to do it. If all you need to do is replace the seal on both sides of the axle the there is an excellent video on Boxer two valve. You just need a heat gun and some bearing drivers and a rubber! (not steel) mallet. Oh and a couple of 5mm x 15mm long cap screws to push the drive apart once you have it out.
If you need to replace the seal between the rear drive and the swing arm, then special tools are needed.
This video is for 85 and later but it is really helpful. William's enthusiasm is infectious.
https://www.boxer2valve.com/1981-on-mec ... drive.html
There may be a video for the earlier models. I could not find it though.
Good luck!